AElement is the minimalist RFID lock with stylish design. It allows the integration of all physical security needs in an energy efficient and easy to manage system. Totally wire-free and networked through SALTO Virtual Network, SALTO Wireless network and JustIN Mobile. Compatible with DIN standard and ANSI mortise locks.
XS4 Mini - EU
XS4 2.0 Mini DIN
XS4 2.0 Mini Australian Model
XS4 2.0 Mini Australian Model
XS4 2.0 Mini Tubular Latch (non-ANSI) Model
XS4 2.0 Mini Tubular Latch (non-ANSI) Model
The XS4 Mini for European DIN mortise locks has been designed with the requirements of DIN 18251 standard doors prepared for DIN 18250 standard mortise locks, and is compatible with the DIN 18251 standard xing instructions.
XS4 EU - Wide
The SALTO XS4 Original wide version is specially designed to t most Euro pro le doors and work with the majority of European mortise locks and cylinders. It is specially designed for use on busy, high traf c doors that need additional strength.
Ex40 | XS4 ORIGINAL NARROW BODY VERSION
XS4 E40 NFC compatible
XS4 E40 privacy option
XS4 E40 key overide option
XS4 E40 with local lockdown function
XS4 E40 iButton ID technlogy
The XS4-40 narrow body version is specially designed to fit most Euro profile doors, even narrow profile framed doors. This version also works with the majority of European mortise locks and cylinders.
XS4 GEO European half cylinder
The XS4 GEO European cylinder is specially designed to fit most Euro doors that are equipped with a European profile cylinder mortise lock.
XS4 EU - Keypad
The SALTO XS4 Original electronic lock with keypad increases security and control, as it offers the choice of three forms of authentication to grant access.
XS4 EU - Security
The SALTO XS4 security model is an ideal choice for use on doors where a higher level of security protection is required, such as exterior doors, main entrances and high security openings. The tough, vandal-resistant construction protects this range against attack and unauthorised entry without losing flexibility or control.
XS4 Double Reader
The XS4 Original Double Reader electronic escutcheon controls both the entry and exit access of a door. Its audit trail facility can identify entry and exit actions, and can be tted to almost any type of Euro prole door. It can also operate with a wide range of locks including Swiss cylinders.
Ælement - EU
The Ælement EURO version is specially designed to fit on most Euro DIN 18250 profile doors. The minimalistic design of the RFID reader looks stylish and discreet on any door. It also offers the choice of a wide range of designer lever handles and finishes.
Model LE7E
The Ælement DIN18250 is specially designed to be used with the Ælement electronic handle set that needs a EURO mortise lock DIN 18250. This lock is a balance between ease-of-use, security and warranty.
XS4 GEO EU cyilinder thumbturn
The XS4 GEO European Cylinder with thumbturn is specially designed to fit most Euro doors that are equipped with a European profile cylinder mortise lock.
XS4 GEO EU double cylinder
The XS4 GEO European cylinder is specially designed to fit most Euro doors that are equipped with a European profile cylinder mortise lock.
G9E2 Cog wheel cam
The XS4 GEO European profile cylinder is specially designed to fit most lock cases using cog wheel locking mechanism.
Model LE8P
The XS4 Euro lock is a mortise lock with latch projection which means the latch is automatically projected and deadlocked when the door is closed. This mortise lock is suitable for all kinds of wooden doors, whether it’s a hotel room, office or warehouse door, etc. The new latch projection function increases security by making it impossible to gain access by using plastic cards.
For additional security, SALTO also offers the option to order this lock with a deadbolt.
Model LE9E
SALTO offers different mortise locks suitable for narrow profile doors. The LE9W is a mortise lock compatible with DIN lock cases that offers a high quality product, and also allows use with an automatic deadbolt projection.
XS4 One
XS4 E70 privacy-option
XS4 E70 privacy-option thumb-turn
XS4 One
XS4 One
XS4 One
XS4 One
XS4 One
XS4 One
The SALTO XS4 One escutcheon is a revolutionary stand-alone electronic lock thanks largely to the level of technology packed inside that brings together the convenience of an offline point -- easy installation and no wires – with virtually the same kind of power and performance of an online point.
The SALTO XS4 One is the evolution of the Original model with a built-in, totally new reader available in two colours. It includes the latest electronic components in order to warranty a future proof feature compatibility The XS4 One version is specially designed to fit most Euro profile doors, even narrow profile framed doors. This version also works with the majority of European mortise locks and cylinders.
LE7S | DIN European mortise lock
The SALTO XS4 LE7S is a DIN compatible mortise lock that offers a wide range of operations and functions possibilities to improve access control with a reliable locking solution.
It includes integrated electronic detectors* to monitorize in real-time the door status, providing an easy to install solution without any additional hardware or drilling needs.
LE7W | DIN European Mortise Lock
The XS4 DIN Mortise lock LE7W is an automatic deadbolt projection mortise lock that fits the DIN standards. This mortise lock is secure and robust, as
it has an intelligent system that projects the deadbolt automatically when the door is closed to ensure that it is properly locked.
SALTO Neo - EU European profile cylinder
SALTO Neo - EU European profile cylinder
SALTO Neo - EU European profile cylinder
SALTO Neo - EU European profile cylinder
SALTO Neo - EU European profile cylinder
The SALTO NEO European cylinder is specially designed to fit most Euro doors that are equipped with a European profile cylinder mortise lock.
SALTO Neo - Swing handle Cylinder
SALTO Neo - Swing handle Cylinder
SALTO Neo - Swing handle Cylinder
The SALTO NEO half cylinder is specially designed to fit most swing handle* rack servers. Ideal for use on applications where control of the operation of the rack is needed, enhancing the control and security of access to the server racks.
XS4 GEO Mortise cylinder
XS4 GxM | ANSI Mortise cylinder front
The XS4 GEO mortise cylinder is specially designed to fit most doors that are equipped with a mortise lock that need a mortise cylinder.
XS4 GEO RIM cylinder
The XS4 GEO RIM US cylinder is specially designed to fit most doors that are equipped with surface mounted lock cases, panic bars and top guards that need a RIM cylinder.
XS4 GEO deadbolt cylinder
XS4 GxB | Deadbolt cylinder
The XS4 GEO Deabolt cylinder model is a specially designed, heavy duty deadbolt cylinder that meets A156.36 grade 1 requirements, and also has a trim ring with protective sleeves that protect and prevent the lock from being attacked through the door. The trim ring also protects the lock from attacks coming vertically. It is designed to provide high levels of security and fit all standard doors in ANSI markets.
XS4 ANSI
The XS4 Original wide body version for ANSI mortise locks is specially designed to be compatible with most ANSI mortise locks and tubular latches. It is specially designed for use on busy, high traffic doors that need additional strength.
XS4 ANSI - Keypad
The XS4 Original wide body version for ANSI mortise locks is specially designed to be compatible with most ANSI mortise locks and tubular latches. It is specially designed for use on busy, high traffic doors that need additional strength.
Model PBF1100
The SALTO XS4 PBF110 device is the emergency exit door's highest standard for security, with enhanced safety performance features. It combines the highest safety along with ease of use and installation. SALTO XS4 PBF110 series exit devices are UL listed for Panic Hardware and Fire Exit Hardware and are certified according to ANSI A156.3, 2001, Grade 1.
AE90 | Ælement voor ANSI deuren
The Ælement ANSI version is specially designed to fit on most ANSI A 156.13 doors. The minimalistic design of the RFID reader looks stylish and discreet on any door. It also offers the choice of a wide range of designer lever handles and finishes.
Model LA1T17
Specially designed for those doors that need an ANSI mortise lock ANSI A 156.13 Grade 1 and a privacy function with a deadbolt for Hospitality purposes.
It includes integrated electronic detection to monitorize in real-time the door status, providing an easy to install solution without any additional hardware or drilling needs.
Model LA1T15
Specially designed for those doors that need an ANSI mortise lock ANSI A 156.13 Grade 1 and a privacy function with a deadbolt.
XS4 cartridge cylindrical latch
With the SALTO XS4 cylindrical latch, you can replace existing traditional knob sets and upgrade them with a state of the art electronic access control system.
SALTO Cartridge cylindrical latches meets ANSI A156.2 Grade 1 requirements, and enables users to replace old cylindrical or tubular latches with new, high quality ones compatible with SALTO electronic escutcheons.
XS4 Mini Standard Model
XS4 Mini Standard Model
XS4 Mini Standard Model
The XS4 Mini ANSI for cylindrical or tubular latches has been designed to meet ANSI A156.2 Grade 1 or 2 cylindrical latch requirements. Easy, simple and quick way to replace existing traditional knob sets, and upgrade them with a state of the art electronic access control system with SALTO's cartridge cylindrical latch.
XS4 Mini Standard Model
XS4 Mini Standard Model
XS4 Mini Standard Model
The XS4 Mini ANSI for cylindrical or tubular latches has been designed to meet ANSI A156.2 Grade 1 or 2 cylindrical latch requirements. Easy, simple and quick way to replace existing traditional knob sets, and upgrade them with a state of the art electronic access control system with SALTO's cartridge cylindrical latch.
LT2K | Tubular latch
The SALTO LT2K tubular latch is a Grade 2 tubular latch that permits combining SALTO electronic escutcheons on doors where a tubular latch retrofit is needed.
Ælement Fusion
AElement Fusion
AElement Fusion
Ælement Fusion is an electronic lock with a sleek reader accentuated by an interactive light ring that illuminates when access credentials are presented, providing a minimalistic design that blends with any hotel décor. The ANSI version is specially designed to fit on most ANSI A 156.13 doors.
SALTO Neo - Swing handle cylinder US
SALTO Neo - Swing handle cylinder US
SALTO Neo - Swing handle cylinder US
The SALTO NEO half cylinder is specially designed to fit most swing handle* rack servers. Ideal for use on applications where control of the operation of the rack is needed, enhancing the control and security of access to the server racks.
XS4 ONE DL
The SALTO XS4 One Deadlatch escutcheon is a revolutionary stand-alone electronic lock specially designed to offer a flexible traffic control during and after business hours.
The last level of technology is packed in an easy installation product that offers a complete access control solution.
Model PBE9000W
The SALTO XS4 PBE900 combines the highest safety standards with ease of use. It is EN1125 compliant in combination with SALTO electronic escutcheons, LE7E31 or LE9E11 SALTO mortise locks, and SALTO KPB (Kit Panic Bars). It's modern, the aesthetic design makes it the perfect choice to complement any architectural style.
Model PBA120W
The SALTO XS4 PBA120 is a new mortise lock panic bar for emergency exit doors. EN1125 tested and approved. Also available with a passive leaf panic bar for double emergency exit doors.
XS4 Australian Oval profile cylinder
The XS4 GEO Australian oval profile cylinder is specially designed to fit most Australian doors that are equipped with an Australian oval profile cylinder mortise lock.
XS 2.0 Mini Australian model
XS4 2.0 Mini Australian
The XS4 Mini for Australian mortise locks has been designed for use with Australian mortise locks that use split spindle systems.
XS4 GxS | SCANDINAVIAN Nordic profile cylinder - exterior
XS4 GxS | SCANDINAVIAN Nordic profile cylinder
The XS4 GEO Scandinavian external cylinder is specially designed to fit most doors that are equipped with a Scandinavian profile cylinder mortise lock. It can be a double reader in combination with the GxS2 (entrance & exit).
XS4 Nordic small
The XS4 Original Nordic narrow body version is specially designed to fit most Scandinavian profile and narrow profile framed doors and to work with standard Scandinavian mortise locks and cylinders.
XS4 Nordic - Wide
The XS4 Original Nordic wide body version is specially designed for use on busy, high traffic doors that need additional strength or to cover old hardware holes and to work with standard Scandinavian mortise locks and cylinders.
XS4 Nordic - Keypad
The SALTO XS4 Original Nordic electronic lock with keypad increases security and control, as it offers the choice of three forms of authentication to grant access.
XS4 GEO SCANDINAVIAN oval interior cylinder
The XS4 GEO Scandinavian internal cylinder is specially designed to fit most doors that are equipped with a Scandinavian profile cylinder mortise lock. In combination with the GxS1 it can be a double reader (entrance & exit)
XS4 GEO SCANDINAVIAN security cylinder
XS4 GxS | SCANDINAVIAN Nordic profile cylinder - security
The XS4 GEO Scandinavian external cylinder is specially designed to fit most doors that are equipped with a Scandinavian security external profile cylinder mortise lock.
Model LSN05
Wide range of specially designed Scandinavian standard mortise locks that ensure the door is locked correctly and securely. Developed to increase both the security and safety of the entire door, especially when used with access control and building key management systems. Suitable for use with Scandinavian XS4 Nordic escutcheons, XS4 Nordic Mini electronic locks and XS4 Nordic GEO cylinder models on both interior and exterior doors.
XS4 Nordic LS5N 04
The LS5N 04 has been developed to increase both the security and safety of the entire door, especially when used with access control and bulding key-management systems. It is suitable for use with SALTO XS4 models on both interior and exterior doors, and its versatility enables it to be used in multiple door environments.
XS4 Nordic LS5N 25
The LS5N 25 has been developed to increase both the security and safety of the entire door, especially when used with access control and bulding key-management systems. Specially designed for use with SALTO GEO Scandinavian range cylinder models used in interior and exterior doors where extra security may be required. Installation is simple and quick, you just need to remove the existing mechanical cylinder and then install the SALTO GEO cylinder in its place.
XS4 2.0 Mini Nordic
XS4 2.0 Mini Nordic
The XS4 Mini Nordic models for Scandinavian mortise locks has been specially designed to fit most Scandinavian profile and narrow profile framed doors and work with standard Scandinavian mortise locks and cylinders. It is completely compatible with the Scandinavian standard fixing instructions.
XS4 Nordic Security
The SALTO XS4 Original Nordic security model is an ideal choice for use on doors where a higher level of security protection is required, such as exterior doors, main entrances and high security openings. The tough, vandal-resistant construction protects this range against attack and unauthorised entry without losing flexibility or control.
XS4 Glass Door - DIN
The XS4 Original DIN glass door lock has been specially designed for use with DIN 18101 standard glass doors. Its steel body is stylish and modern and its unique
‘sandwich body’ construction makes it easy to install, without having to replace the door. A wireless version of the XS4 DIN glass door lock is also available for real-time access control requirements.
XS4 GxU | UK OVAL Profile cylinder with thumbturn
The XS4 GEO UK oval cylinder is specially designed to fit most doors that are equipped with a UK profile cylinder mortise lock.
XS4 Geo - UK - half
The XS4 GEO UK oval cylinder is specially designed to fit most doors that are equipped with a UK profile cylinder mortise lock.
XS4 GEO UK double cylinder
The XS4 GEO UK oval cylinder is specially designed to fit most doors that are equipped with a UK profile cylinder mortise lock.
XS4 GEO UK RIM cylinder
The XS4 GEO UK RIM cylinder is specially designed to fit most doors that are equipped with surface mounted lock cases, panic bars and top guards that need this type of locking system.
SALTO Neo - UK oval profile cylinder
SALTO Neo - UK oval profile cylinder
SALTO Neo - UK oval profile cylinder
The SALTO NEO UK oval cylinder is specially designed to fit most doors that are equipped with an UK oval profile cylinder mortise lock.
XS4 GEO Swiss profile round half cylinder
The XS4 GEO Swiss profile cylinder is specially designed for doors with a Swiss round profile cylinder mortise lock.
XS4 GEO SWISS round double cylinder
The XS4 GEO Swiss profile cylinder is specially designed for doors with a Swiss round profile cylinder mortise lock.
XS4 GEO Swiss profile round cylinder with thumbturn
The XS4 GEO Swiss profile cylinder is specially designed for doors with a Swiss round profile cylinder mortise lock.
SALTO Neo - Swiss profile cylinder
SALTO Neo - Swiss profile cylinder
SALTO Neo - Swiss profile cylinder
The SALTO NEO Swiss cylinder is specially designed to fit most Euro doors that are equipped with a Swiss profile cylinder mortise lock.
XS4 Modular WR 2.0
XS4 Modular WR 2.0
XS4 Modular WR 2.0
The SALTO XS4 Modular Wall Reader 2.0, in combination with the SALTO XS4 2.0 Controller, facilitates the integration of the wall reader with almost any SALTO interface, such as SALTO ProAccess SPACE to provide your facility with a complete security solution for any kind of installations, even from adverse and harsh environments thanks to the ability to install it in combination with the antivandalic frame.
Model WRx001FS
The SALTO contactless slim wall reader for flush mounting has been specially designed to fit doors that have a narrow profile frame and where there is insufficient space to install a standard wall reader. The wall reader reads data from the carrier and then communicates it to the control unit. They also allow for updating of the carriers via SALTO Virtual Network technology. The reader is IP56 compliant and features a built-in heater making it suitable for use indoors and out, including environments exposed to harsh weather conditions.
XS4 2.0 Wallreader
The SALTO XS4 Wall Reader 2.0 incorporates the cutting-edge design standard of the XS4 2.0 product range in this technological powerhouse. In combination with the SALTO XS4 2.0 Controller, it facilitates the integration of the wall reader with almost any SALTO interface such as SALTO ProAccess SPACE, to provide your facility with a complete security solution.
XS4 2.0 WRM Key Pad
The SALTO XS4 Wall Reader 2.0 with keypad incorporates the cutting-edge design standard of the XS4 2.0 product range in this technological powerhouse. This product allows for the additional use of a Personal Identification Number (PIN) keypad option, increasing the security by using a double authentication and more enhanced opening modes.
XS4 RFID Wall Reader for narrow profile applications
The XS4 Original slim wall reader for flush mounting has been specially designed to fit lifts, sliding doors or electronic gate doors that have a narrow profile frame, and where there is insufficient space to install a standard wall reader. It offers a broad range of 13,56Mhz RFID contactless smart cards for mainstream RFID technologies. All communication between the carrier and the wall reader is encrypted and secured to communicate to the CU5000 door controllers range. They also allow for updating of the carriers via SALTO Virtual Network data-on-card technology.
XS4 Modular WR
The XS4 Original Modular wall reader offers a broad range of 13,56Mhz RFID cards of the mainstream contactless smart key card application technologies on the market. It reads encrypted data from the carriers and then communicates it to the door controllers.
Mullion reader 2.0
The SALTO slim Wall Reader for flush mounting has been specially designed to fit lifts, sliding doors or electronic gate doors that have a narrow profile frame, and where there is insufficient space to install a standard wall reader.
Panel reader 2.0
The SALTO Panel reader 2.0 is a peripheral based door entry system that works in conjunction with SALTO controllers.
Designed to be integrated behind lift panels, door intercoms, electric switches or turnstiles & gates. These models need a window, which is necessary for reader antenna operation.
XS 2.0 ANSI Wall reader
The SALTO XS4 Wall Reader 2.0 incorporates the cutting-edge design standard of the XS4 2.0 product range in this technological powerhouse. The SALTO XS4 Wall Reader 2.0 in combination with the SALTO XS4 2.0 Controller facilitates the integration of the wall reader with almost any SALTO interface, such as SALTO ProAccess SPACE to provide your facility with a complete security solution. This wall reader has been specially designed to fit ANSI standard electric boxes to make the installation easier.
XS 2.0 ANSI Wall reader with keypad
The SALTO XS4 Wall Reader 2.0 with keypad incorporates the cutting-edge design standard of
the XS4 2.0 product range in this technological powerhouse. This product allows for the additional use of a Personal Identification Number (PIN) keypad option, increasing the security by using a double authentication and more enhanced opening modes. This wall reader has been specially designed to fit ANSI standard electric boxes to make the installation easier.
XS4 RFID Modular Wall Reader
SALTO offers a broad range of 13,56Mhz RFID Contactless Smart Card wall readers. They read encrypted data from the carriers and then communicate it to the door controllers. They also allow for updating of the carriers via SALTO Virtual Network technology. All models are IP 56 compliant making them suitable for use indoors and out, including environments exposed to harsh weather conditions. Compatible with ISO 14.443A, ISO 14.443B and ISO 15.693 (Vicinity) and covering a wide range of mainstream RFID brands such as Mifare, Mifare plus, DESfire, DESfire EV1, Ultralight C, EV1 Legic, Legic Advant, HID iCLASS and Picopass.
Long-distance reader
Long-distance reader
Long-distance reader
Extremely robust die-cast aluminium housing and compact design with integrated antenna. The WRLUD24Bxx boasts a range of 7m and the WRLUD14Bxx covers 3m. It is a complement product to the SALTO XS4 online Controller for a real time identification on the go.
Converter
The WRLUD-SIC1 Wiegand converter is the link between the WRLUD and the CU42E0. It manages the real time communications assuring a perfect connection to the SALTO ProAccess SPACE software.
Wave XS - European Touchless Button
Wave XS - European Touchless Button
Wave XS - European Touchless Button
The Wave XS is a touchless button that permits an easy and clean operation of a large number of activator devices. Wave XS reader technology offers 100% touch-free automated access control. Depending on the configuration, the Wave XS reader’s capacitive technology can sense hand gestures. All the user has to do is approach the door and their hand activates the door opening, which makes for simple operation and eliminates the need to touch any surface.
With the Wave XS European standard reader range, you can easily install hands-free automatic door opening hardware on an existing electrified door to eliminate that added touchpoint and promote a touchless, ADA-compliant building. The solution can also be integrated with the SALTO Systems controller (CUs) product range which delivers seamless integrations with sliding doors and automatic doors to further reduce touchpoints throughout the building.
Wave XS - Danish Touchless Button
Wave XS - Danish Touchless Button
Wave XS - Danish Touchless Button
The Wave XS is a touchless button that permits an easy and clean operation of a large number of activator devices. Wave XS reader technology offers 100% touch-free automated access control. Depending on the configuration, the Wave XS reader’s capacitive technology can sense hand gestures. All the user has to do is approach the door and their hand activates the door opening, which makes for simple operation and eliminates the need to touch any surface.
With the Wave XS Danish standard reader range, you can easily install hands-free automatic door opening hardware on an existing electrified door to eliminate that added touchpoint and promote a touchless, ADA-compliant building. The solution can also be integrated with the SALTO Systems controller (CUs) product range which delivers seamless integrations with sliding doors and automatic doors to further reduce touchpoints throughout the building.
Model WRMx001E
The Contactless SALTO modular wall reader with external case is specially designed for outdoor installation on uneven surfaces. The wall reader reads data from the carrier and then communicates it to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology. The reader is IP 56 compliant and features a built-in stainless steel external case making it suitable for use indoors and out, including environments exposed to harsh weather conditions.
Model WRMx001EK
The Contactless SALTO modular wall reader with key pad is a wall reader that includes a PIN Key Pad specially designed for outdoor installation on uneven surfaces. The key pad provides increased security as dual identification is needed to access the door. The wall reader reads data from the carrier and then communicates to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology. The reader is IP 56 compliant and features a built-in stainless steel external case making it suitable for use indoors and out, including environments exposed to harsh weather conditions.
Model WRMx001 WRMKP
Compatible with SALTO modular wall readers, the WRMKP keypad allows for the additional use of a Personal Identification Number (PIN) key pad option. It should be mounted on one of the SALTO WRM double mount bases.
Model WRMPExSK
Smart, innovative and designed with aesthetics in mind, the SALTO Modular Wall Reader Pedestal is a new product developed to allow for the installation of readers and controllers in places where they cannot normally be fitted, such as on door frames or walls. Suitable for indoor use, the Modular Wall Reader Pedestal can be fitted with any model of SALTO wall reader and 5000 door controller series. Made of AISI316L bright polished stainless steel and DDA compliant, the Modular Wall Reader Pedestal is suitable for use in a wide range of environments including Hospitals, Airports, Universities, Schools, etc.
Model WRMx001 WRMFWAV
This accessory has been designed to protect the WRM wall reader from adverse and harsh environments.
Modular Wall Reader bases
Modular Wall Reader bases
Modular Wall Reader bases
Modular Wall Reader bases
SALTO offers several base options to fit modular wall readers. Depending on your needs, you can choose a single or double base to fit a wall reader and a keypad.
Both bases include an internal gasket to prevent water ingress and have several fixing points to allow for adjustment during installation.
XS4 WR Pedestal
A parking or gate pedestal designed for the XS4 Modular Wall Reader range is a product developed to allow for the installation of readers and controllers in places where they cannot normally be fitted, such as on door frames, automatic barriers or electrical gates. Suitable for indoor and outdoor use; it can be comnbined with any model of XS4 Original wall reader and 5000 door controller series. Made of AISI316L bright polished stainless steel and DDA compliant, the Modular Wall Reader Pedestal
is suitable for use in a wide range of environments including hospitals, airports, universities, schools, etc.
Model CU2010
Designed for use with the SALTO WRM1000 wall reader, the offline CU2010 is a relay output door controller that can be connected to the WRM1000 wall reader. It offers a single wall reader connection and a single output control relay.
Model CU5010
Designed for use with the SALTO WRM8001 wall reader, the offline CU5010 is a relay output door controller that can be connected to one wall reader. It offers a single wall reader connection and a single output control relay.
Model CU5000
The SALTO CU5000 is a single door offline door controller that can have one or two wall readers connected and has two control relay outputs.
Model CU50EN
The SALTO CU50EN is an online IP door controller that can have one or two wall readers connected and has two control relay outputs. Access control changes can be carried out on the SALTO software and are then actioned at the door controller in real time. It provides full on-line features via the networked Ethernet / WIFI link such as door monitoring status, remotely controlling door opening and Roll Call.
XS4 CU - Online SVN Control Unit
The SALTO XS4 CU50ENSVN is an online door controller that can have one or two wall readers connected, has two control relay outputs and has SALTO Virtual Network (SVN) capabilities. Cards are automatically updated with the latest changes in the access plan. It records the user audit into the PC and provides advanced information on battery status.
It also continually updates the cancelled ID carrier blacklist simply by using the cards on the network, distributing the latest access information throughout the building via the offline stand-alone locks. Access control changes can be carried out on the SALTO software and these are then actioned at the control units in real time. It provides full online features via the networked live link such as door monitoring status, remotely controlling door opening and Roll Call.
Model EB5008
The EB5008 provides the option to manage multi-relay switchable output systems such as elevator floor level access, multi-shutter and barrier systems, machine switching and more.
WRADAPT SALTO
The SALTO Wall Reader Adaptor opens the integration to third party devices such as time and attendance, POS, etc. The Wall Reader Adaptor is designed to read data from the RW carriers and send it to an external device. The interface with the external device can be RS232, OMRON and WIEGAND.
CUADAPT SALTO
The SALTO Control Unit Adaptor opens the integration with third party devices such as time and attendance systems. The Control Unit Adaptor is connected to the CU50ENSVN, sending to a third party device the data information that is requested. This means that you can access a door with all the convenience of SALTO and control your staff attendance at the same time. The interface with the external device can be RS232, OMRON and WIEGAND.
XS4 2.0 CU SVN online
SALTO’s XS4 2.0 control unit makes it even easier to bring superior access control to your facility, thanks to the ability to control and manage multiple doors through one Ethernet connection and one IP address. This means that extending SALTO access control benefits to all those doors where a stand-alone electronic escutcheon cannot be fitted (electric strikes, magnets, barriers, elevators, etc.) is even easier and more cost-effective.
XS4 2.0 CU auxiliary
SALTO’s latest control unit makes it even easier to bring superior access control to your facility, thanks to the ability to control and manage multiple doors through one Ethernet connection and one IP address. The New SALTO XS4 2.0 Controller CU4200 is an auxiliary controller that does not require an IP address and can be set up as an auxiliary controller connected to an XS4 online controller (CU42E0), or can work as an offline controller, reducing the costs of installation and keeping all the advantages of the SALTO Data-on-card technology.
XS4 2.0 Expansion board
The CU42EB8 provides multi-relay switchable output management to external systems such as elevator floor level access, multi-shutter and barrier systems, machine switching and more.
XS4 Locker Lock
XS4 Locker Lock
XS4 Locker Lock
The SALTO XS4 Locker Lock is a locker lock designed to bring all the advantages of an electronic access control for lockers and cabinets. The XS4 Locker is perfect for controlling access to lockers, cupboards, cabinets, boxes and showcases, where access control and full audit trailing are required.
SALTO Proaccess
SALTO ProAccess was developed to serve as a powerful Access Control management tool, with a variety of features that allow users to effectively manage building access control of stand.alone devices, and IP online devices in one converged platform.
SALTO Proaccess HAMS
HAMS (Hotel Access Management Software) was developed to allow hotel clients to easily control all their access and guest management needs with one easy-to-use system. SALTO HAMS offers a range of features and tools that makes it easy to control all the offline and online guest room and back of house doors in a property from one central location. It is compatible with most property management software such as Micros Fidelio, New Hotel, Protel, TBC etc and can also be used to manage SALTO Intelligent Energy Saving Devices (ESD's).
ProAccess SPACE
SALTO's ProAccess SPACE web-based software brings a new level of powerful flexibility to access control so that users can order the functionalities that they most need and upgrade accordingly as a system and needs grow. And in addition to the abundance of important new functionalities, SPACE also has a modern interface that is more user-friendly to help users find and operate the functions they want to use as quickly and intuitively as possible.
For more information on ProAccess SPACE visit proaccess-space.saltosystems.com
Panic Bar Adaptor Kit
The XS4 SALTO KPBs (Kit Panic Bars) make it possible to fit stand-alone electronic escutcheons in combination with existing panic bars. SALTO has developed a
wide range of KPBs that are compatible with the most popular panic bars on the market.
i Buttons
- Simple and intuitive use due to the smart design of the i-Button and the electronic lock reader. - Extremely resistant system suitable for all kinds of environments. - 512bytes or 2Kbytes i-Button fobs available. - 5 different colours, black, blue, green, red and yellow. - Reusable keys. - SALTO Virtual Network (SVN) compatible. - i-Buttons can be customized by numeration. - i-Buttons are waterproof. - SALTO i-Button keys models are available in: red, grey, yellow, black , green.
Contactless RFID card
Reusable, contactless RFID smart cards for access control. It provides higher levels of security than traditional mechanical key management and additional applications can be implemented on the same ID user credential.
i Button bracelet
- Simple and intuitive use due to the smart design of the i-Button and the electronic lock reader. - Extremely resistant system suitable for all kinds of environments. - 512bytes or 2Kbytes i-Button bracelets available. - 5 different colours, black, blue, green, red and yellow. - Reusable keys. - SALTO Virtual Network (SVN) compatible. - i-Buttons can be customized by numeration. - i-Buttons are waterproof. - SALTO i-Button bracelets models are available in: red, blue, yellow, green,
Contactless RFID key fobs
Contactless RFID key fobs are a cost-effective, secure and convenient solution for commercial and industrial applications with a durable housing for rugged use or harsh environments. Attractively designed, SALTO XS4 contactless key fobs are available in various color.
Contactless RFID bracelets
Contactless RFID silicone bracelets are comfortable, easy to wear and a good alternative to classical key fobs and cards. A convenient solution for commercial and industrial applications with a durable housing for rugged use or harsh environments. Attractively designed, are available in various color.
Contactless key bracelets
Contactless RFID key bracelets are a cost-effective, secure, easy to wear and convenient solution for commercial and industrial applications with a durable housing for rugged use or harsh environments. Attractively designed, SALTO XS4 contactless key fobs are available in various color.
XS4 EU - DIN
The SALTO XS4 Original DIN version escutcheon is specially designed to meet the requirements of DIN18250 and 18251 standard doors prepared for DIN 18250 standard mortise locks. The new escutcheon range maintains the fire rating of the door as no additional drilling of the door is required.
XS4 EU - SKG**
The SALTO XS4 Original SKG is designed to suit the needs of those doors that necessitate special reinforcement or require SKG certification against burglary.
XS4 Complementary Escutcheon Range
The XS4 Complementary Escutcheon Range is designed to maintain the aesthetics of a door that does not need to be controlled. The SALTO XS4 complementary escutcheon is available in a range of designs, but contains no access control electronics.
Model LE7E
SALTO offers 2 different DIN 18250 mortise locks suitable for all kinds of wooden doors that need to be compatible with DIN standards. The locks are automatic locks that project the deadbolt when the door is closed for greater security. For user safety the mortise locks also have a panic function so they can be opened from the inside in case of emergency.
XS4 One DIN
XS4 ONE - DIN
XS4 ONE - DIN
XS4 ONE - DIN
The SALTO XS4 One DIN version escutcheon is specially designed to meet the requirements of DIN18250 and 18251 standard doors prepared for DIN 18250 standard mortise locks. The new escutcheon range maintains the fire rating of the door as no additional drilling of the door is required.
XS4 GEO cylinder for swing handle
The XS4 GEO half cylinder is specially designed to fit most swing handle* rack servers. Ideal for use on applications where control of the operation of the rack is needed, enhancing the control and security of access to the server racks.
XS4 GEO Cam Lock cylinder
XS4 GxCL | CAM Lock cylinder front
The XS4 GEO Cam Lock electronic cylinder is specially designed to fit most cabinets equipped with a cam locking mechanism. The cam itself acts as a locking bolt and is directly operated when the card is presented by the user and turns the plug. The cam rotates between 180 and 90 degrees, securing the lock. This patented system provides an extra level of protection from intrusions with a high security blocking mechanism that is exclusive to SALTO.
XS4 GEO Electronic Padlock
The XS4 GEO Electronic Padlock is a versatile locking solution that enables users to benefit from the advantages of electronic access control where previously it was only possible to use a mechanical locking solution (i.e., perimeter or fire access gates, industrial equipment yards and residential storage areas).
Australia 
België 
Canada English 
China 
Colombia 
Czech 
Denmark 
Deutschland 
Finland 
France 
Hong Kong 
India 
Italia 
Mexico 
Middle East ME 
Nederland 
Norway 
Poland 
Portugal 
Schweiz 
Singapore 
Slovakia 
South Africa 
Sweden 
USA 
United Kingdom 
Vietnam 
