Close

SALTO Systems HQ Spain

SALTO Systems country offices

Product range

XS4 Wall readers & XS4 Door controllers

SALTO peripheral products provide the ideal solution for those access points where online connectivity is needed, or where interaction with other systems or electric powered devices such as elevators, roller shutter doors or barriers is required.

close
  • XS4 GEO Mortise cylinder

  • XS4 GxM | ANSI Mortise cylinder front

  • XS4 GEO Mortise cylinder

    The XS4 GEO mortise cylinder is specially designed to fit most doors that are equipped with a mortise lock that needs a mortise cylinder.

    close
  • XS4 GEO RIM cylinder

  • XS4 GEO RIM cylinder

    The XS4 GEO US RIM cylinder is specially designed to fit most doors that are equipped with surface mounted lock cases, panic bars and top guards that need a RIM cylinder.

    close
  • XS4 GEO deadbolt cylinder

  • XS4 GEO deadbolt cylinder

  • XS4 GEO deadbolt cylinder

    The XS4 GEO brand new electronic heavy duty deadbolt cylinder meets A156.36 grade 1 requirements, and also has a trim ring with protective sleeves that protects and prevents the lock from being attacked through the door. The trim ring also protects the lock from attacks coming vertically. It is designed to provide high levels of security and fit all standard doors in ANSI markets. It is available with three different functions: single cylinder, classroom style and double cylinder for both inside and outside opening with the smart credential.

    close
  • XS4 A60

  • XS4 A60

    The XS4-60 wide body version for ANSI mortise locks is specially designed to be compatible with most ANSI mortise locks and tubular latches. It is specially designed for use on busy, high traffic doors that need additional strength.

    close
  • XS4 A60K

  • XS4 A60K

    The XS4 electronic lock with keypad increases security and control as it offers the choice of two forms of authentication to grant access. You can use your credential, your credential plus PIN (Personal Identification Number) or just your PIN to gain access. It is also available in a wireless version for online, real-time control.

    close
  • Model PBF1100

  • XS4 RIM Panic Bar

    The SALTO XS4 PBF1100 device is the emergency exit door's highest standard for security, with enhancing safety performance features. It combines the highest safety along with ease of use and installation. SALTO XS4 PBF1100 series exit devices are UL listed for Panic Hardware and Fire Exit Hardware, and are certified according to ANSI A156.3, 2001, Grade 1.

    close
  • AE90 | Ælement voor ANSI deuren

  • Ælement ANSI version

    The Ælement ANSI version is specially designed to fit on most ANSI A 156.13 doors. The minimalistic design of the RFID reader looks stylish and discreet on any door. It also offers the choice of a wide range of designs and finishes.

    close
  • Model LA1T17

  • Ælement ANSI mortise lock

    The Ælement ANSI is specially designed to be used with the Ælement electronic handle set that needs an ANSI mortise lock ANSI A 156.13 Privacy function with deadbolt available for hospitality purposes.

    close
  • Model LA1T15

  • XS4 ANSI mortise lock / with deadbolt

    Specially designed for those doors that need an ANSI mortise lock ANSI A 156.13 Grade 1 and a privacy function with a deadbolt.

    close
  • XS4 cartridge cylindrical latch

  • XS4 Cartridge cylindrical latch

    With the SALTO XS4 cylindrical latch you can replace existing traditional knob sets, and upgrade them with a state of the art electronic access control system. SALTO Cartridge cylindrical latches are ANSI A156.2 Grade1 or 2, depending on the model and enable users to replace old cylindrical or tubular latches for new high quality ones compatible with SALTO electronic escutcheons.

    close
  • XS4 Mini Standard Model

  • XS4 Mini Standard Model

  • XS4 Mini Standard Model

  • XS4 Mini ANSI

    Its top quality zinc alloy construction and Mifare-DESFire and BLE (Bluetooth Low Energy) technologies allow it to work with conventional smartcards and/or via SALTO’s JustIN Mobile app.

    The XS4 Mini’'s easy-to-install design makes it simple for security professionals to upgrade security and replace mechanical key operated door locks with the latest electronic access control solution suitable for a wide range of customer applications.

    Power is supplied via three AA batteries, with battery life good for up to three years of normal operation. When batteries run low, the XS4 Mini has audible and visual indicators and batteries can be replaced effortlessly within minutes.

    Latest technologies:

    • Comes with Mifare and BLE (Bluetooth Low Energy) technologies
    • Works with conventional smartcards and/or via SALTO’s JustIN Mobile app

    New installations and retrofits:

    • Easy to install, perfect for expanding/upgrading existing access control without wires
    • Compatible with the full range of SALTO hardware

    Security and usability:

    • Superior structural integrity with tough, but sleek, outer body
    • Large easy-to- read LED to clearly indicate if access is granted or refused
    • Readers available in black or white
    • Choice of 2 functional and stylish handles

    close
  • XS4 Glass door lock DIN18101

  • XS4 Glass door lock DIN18101

    The XS4 'DIN' glass door lock has been specially designed for use with DIN 18101 standard glass doors. Its steel body is stylish and modern and its unique 'sandwich body' construction makes it easy to install - without having to replace the door. A 'wireless' version of the XS4 'DIN' glass door lock is also available for real-time access control requirements.

    close
  • XS4 Glass door lock

  • XS4 Glass door lock

    The XS4 glass door lock's exclusive design makes it compatible with a wide range of commonly used glass door designs, including those already fitted with a built-in lock. It's unique 'sandwich body' design also makes for easy installation, without having to replace the door.

    close
  • XS 2.0 ANSI Wall reader

  • XS4 2.0 ANSI Wall Reader

    As part of SALTO’s family of Wall Readers, the XS4 2.0 WRD is a 13,56Mhz RFID Contactless Smart Card reader that combines modern, sleek design with exceptionally clear LED signalling. It includes latest electronics and is completely sealed and designed for heavy-duty outdoor use (IP 66).

    It reads encrypted data from the carriers and then communicates it to the door controllers. SALTO wall readers also allow for updating of the carriers via SALTO Virtual Network technology. 

    The XS4 2.0 WRD is available in both black and white and covers a wide range of mainstream RFID brands such as Mifare, Mifare plus, DESfire, DESfire EV1, Ultralight C, and is also works with BLE, opening to the world of mobile-technology based solutions. 

    close
  • XS 2.0 ANSI Wall reader with keypad

  • XS4 2.0 ANSI Wall Reader with keypad

    As part of SALTO’s family of Wall Readers, the XS4 2.0 WRD Keypad model is a 13,56Mhz RFID Contactless Smart Card and Keypad reader that combines modern, sleek design with exceptionally clear LED signalling. It includes latest electronics and is completely sealed and designed for heavy-duty outdoor use (IP 66). In addition, the keypad permits maximum flexibility without sacrificing security with 3 authentication modes available. The XS4 2.0 WRD keypad includes latest-generation electronics and is BLE compatible. Plus, its system of intelligent keypad lighting activates automatically when needed.

    SALTO wall readers use an encrypted connection to the SALTO Controller for additional security. SALTO wall readers also allow for updating of the carriers via SALTO Virtual Network technology.

    The XS4 2.0 WRD Keypad covers a wide range of mainstream RFID brands such as Mifare, Mifare plus, DESfire, DESfire EV1, Ultralight C, and is also works with BLE, opening to the world of mobile-technology based solutions.

    close
  • XS4 RFID Modular Wall Reader

  • XS4 RFID Modular Wall Reader

    SALTO offers a broad range of 13,56Mhz RFID Contactless Smart Card wall readers. They read encrypted data from the carriers and then communicate it to the door controllers. They also allow for updating of the carriers via SALTO Virtual Network technology. All models are IP 56 compliant making them suitable for use indoors and out, including environments exposed to harsh weather conditions. Compatible with ISO 14.443A, ISO 14.443B and ISO 15.693 (Vicinity) and covering a wide range of mainstream RFID brands such as Mifare, Mifare plus, DESfire, DESfire EV1, Ultralight C, EV1 Legic, Legic Advant, HID iCLASS and Picopass.

    close
  • Model WRMx001E

  • XS4 RFID Modular Wall Reader for special wall mounting

    The Contactless SALTO modular wall reader with external case is specially designed for outdoor installation on uneven surfaces. The wall reader reads data from the carrier and then communicates it to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology. The reader is IP 56 compliant and features a built-in stainless steel external case making it suitable for use indoors and out, including environments exposed to harsh weather conditions.

    close
  • Model WRMx001EK

  • XS4 RFID Modular Wall Reader for special wall mounting with keypad

    The Contactless SALTO modular wall reader with key pad is a wall reader that includes a PIN Key Pad specially designed for outdoor installation on uneven surfaces. The key pad provides increased security as dual identification is needed to access the door. The wall reader reads data from the carrier and then communicates to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology. The reader is IP 56 compliant and features a built-in stainless steel external case making it suitable for use indoors and out, including environments exposed to harsh weather conditions.

    close
  • Model WRMx001 WRMKP

  • XS4 WRM Keypad

    Compatible with SALTO modular wall readers*, the WRMKP key pad allows for the additional use of a Personal Identification Number (PIN) key pad option. It should be mounted on one of the SALTO WRM double mount bases. * Check for compatibility.

    close
  • Model WRMPExSK

  • XS4 WRM Pedestal

    Smart, innovative and designed with aesthetics in mind, the SALTO Modular Wall Reader Pedestal is a new product developed to allow for the installation of readers and controllers in places where they cannot normally be fitted, such as on door frames or walls. Suitable for indoor use, the Modular Wall Reader Pedestal can be fitted with any model of SALTO wall reader and 5000 door controller series. Made of AISI316L bright polished stainless steel and DDA compliant, the Modular Wall Reader Pedestal is suitable for use in a wide range of environments including Hospitals, Airports, Universities, Schools, etc.

    close
  • Model WRMx001 WRMFWAV

  • XS4 WRMFWAV antivandalic frame for SALTO modular wall readers

    This accessory has been designed to protect the WRM wall reader from adverse and harsh environments.

    close
  • XS4 WRM Mounting bases for modular wall readers

  • XS4 WRM Mounting bases for modular wall readers

  • XS4 WRM Mounting bases for modular wall readers

  • XS4 WRM Mounting bases for modular wall readers

  • XS4 WRM Mounting bases for modular wall readers

    SALTO offers several base options to fit modular wall readers. Depending on your needs you can choose a single or double base to fit a wall reader and a key pad. Both bases include an internal gasket to prevent water ingress and have several fixing points to allow for adjustment during installation.

    close
  • Model CU2010

  • CU2010

    Designed for use with the SALTO WRM1000 wall reader, the offline CU2010 is a relay output door controller that can be connected to the WRM1000 wall reader. It offers a single wall reader connection and a single output control relay.

    close
  • Model CU5010

  • CU5010

    Designed for use with the SALTO WRM8001 wall reader, the offline CU5010 is a relay output door controller that can be connected to one wall reader. It offers a single wall reader connection and a single output control relay.

    close
  • Model CU5000

  • CU5000

    The SALTO CU5000 is a single door offline door controller that can have one or two wall readers connected and has two control relay outputs.

    close
  • Model CU50EN

  • CU50EN

    The SALTO CU50EN is an online IP door controller that can have one or two wall readers connected and has two control relay outputs. Access control changes can be carried out on the SALTO software and are then actioned at the door controller in real time. It provides full on-line features via the networked Ethernet / WIFI link such as door monitoring status, remotely controlling door opening and Roll Call.

    close
  • CU50ENSVN

  • CU50ENSVN

    The SALTO XS4 CU50ENSVN is an online door controller that can have one or two wall readers connected, has two control relay outputs and has SALTO Virtual Network (SVN) capabilities. Cards are automatically updated with the latest changes in the access plan. It records the user audit into the PC and provides advanced information on battery status. It also continually updates the cancelled ID carrier blacklist simply by using the cards on the network, distributing the latest access information throughout the building via the offline stand alone locks. Access control changes can be carried out on the SALTO software and these are then actioned at the control units in real time. It provides full online features via the networked live link such as door monitoring status, remotely controlling door opening and Roll Call.

    close
  • Model EB5008

  • EB5008 SALTO multi relay output control board

    The EB5008 is a device which, when connected to CU5000, CU50EN or CU50ENSVN door controllers, provides the option to manage multi relay switchable output systems such as elevator floor level access, multi shutter and barrier systems, machine switching and more.

    close
  • WRADAPT SALTO

  • WRADAPT SALTO wall reader adaptor

    With the SALTO Wall Reader Adaptor, it's possible to integrate with third party devices such as time and attendance, POS etc. The Wall Reader Adaptor is designed to read data from the RW carriers and send this to an external device. It is connected on one side to any SALTO Wall Reader, and on the other side to the external device. The interface with the external device can be RS232, OMRON and WIEGAND.

    close
  • CUADAPT SALTO

  • CUADAPT SALTO control unit adaptor

    With the SALTO Control Unit Adaptor, it's possible to integrate with third party devices such as time and attendance systems. The Control Unit Adaptor is designed to allow users to update their cards at the reading point they use on a daily basis, for instance a Time and Attendance terminal. The SALTO wall reader and door controller will update and revalidate the card (see CU50ENSVN for all features) and then send the relevant ID data to the 3rd party device such as a T&A controller. This means you can now access a door with all the convenience of SALTO and control your staff attendance at the same time. The CU Adaptor is connected on one side to any SALTO door controller, and on the other side to the external device. The interface with the external device can be RS232, OMRON and WIEGAND.

    close
  • XS4 2.0 Controller

  • XS4 2.0 Controller

    The XS4 2.0 door controller has substantial technological advances and can be configured as 2 different doors or one door reader in and reader out locking, that allows management of up to 10 doors from 1 IP address.

    All door controllers enable the integration of SALTO access control with building management systems, e.g. for triggering lifts or post boxes. The door controllers transmit data stored on the carrier to the access control software and allow for updating of the carrier via the wall reader making it possible to cancel lost or stolen cards.

    close
  • XS4 LOCKER for lockers and cabinets

  • XS4 LOCKER for lockers and cabinets

  • XS4 LOCKER for lockers and cabinets

    The SALTO XS4-Locker is a locker lock designed to bring all the advantages of an electronic access control for locker, and cabinets. Its ergonomic frontal knob has been design to make easier the use of the locker. The electronical and the mechanical components are located on the inside to enhance the security against vandalism or manipulation. The XS4-Locker is perfect for controlling access to lockers, cupboards, cabinets, cabins, boxes, show cases, where access control and full audit trailing are required, eg where valuables such as medical drugs, electronic equipment, museum pieces, confidential documentation, are stored. - Maximum number of users per door: 64,000 - Maximum number of doors per system: 64,000 - Maximum events on lock audit: 1,000 - Managed through SALTO software Pro Access or HAMS - Timezones: 256 - Timeperiods: 30 - Calendars in system: 256 - Zones in system: 1,024 - User groups: unlimited

    close
  • SALTO Proaccess

  • ProAccess software

    SALTO ProAccess was developed to serve as a powerful Access Control management tool, with a variety of features that allow users to effectively manage building access control of stand.alone devices, and IP online devices in one converged platform.

    close
  • SALTO Proaccess HAMS

  • ProAccess HAMS

    HAMS (Hotel Access Management Software) was developed to allow hotel clients to easily control all their access and guest management needs with one easy-to-use system. SALTO HAMS offers a range of features and tools that makes it easy to control all the offline and online guest room and back of house doors in a property from one central location. It is compatible with most property management software such as Micros Fidelio, New Hotel, Protel, TBC etc and can also be used to manage SALTO Intelligent Energy Saving Devices (ESD's).

    close
  • SALTO ProAccess Space

  • ProAccess SPACE

    SALTO's ProAccess SPACE web-based software brings a new level of powerful flexibility to access control so that users can order the functionalities that they most need and upgrade accordingly as a system and needs grow. And in addition to the abundance of important new functionalities, SPACE also has a modern interface that is more user-friendly to help users find and operate the functions they want to use as quickly and intuitively as possible.

    For more information on ProAccess SPACE visit proaccess-space.saltosystems.com

    close
  • i Buttons

  • i-Button

    - Simple and intuitive use due to the smart design of the i-Button and the electronic lock reader. - Extremely resistant system suitable for all kinds of environments. - 512bytes or 2Kbytes i-Button fobs available. - 5 different colours, black, blue, green, red and yellow. - Reusable keys. - SALTO Virtual Network (SVN) compatible. - i-Buttons can be customized by numeration. - i-Buttons are waterproof. - SALTO i-Button keys models are available in: red, grey, yellow, black , green.

    close
  • Contactless RFID card

  • Contactless RFID cards

    - RFID technologies available: DESfire, DESfire EV1, Mifare, Mifare plus, Mifare Ultralight C, Legic Advant, Picopass, HID iCLASS©. - 13.56MHz contactless RFID identification. - High security by using encrypted proximity cards*. - SALTO Virtual Network (SVN) compatible. - Different memory capacities from 112bytes up to 4Kbytes*. - Key shape available: ISO 7810 Cards. - Reusable key cards. - Multi-application with other systems using the same card through shared sectors*. - Customized card issuing through the SALTO Authorization Media software (SAM)*. - Waterproof cards which can be customized with other options such as Mag stripe, signature panels numeration are also available. - Available in self-programmable sets.

    close
  • i Button bracelet

  • i-Button bracelets

    - Simple and intuitive use due to the smart design of the i-Button and the electronic lock reader. - Extremely resistant system suitable for all kinds of environments. - 512bytes or 2Kbytes i-Button bracelets available. - 5 different colours, black, blue, green, red and yellow. - Reusable keys. - SALTO Virtual Network (SVN) compatible. - i-Buttons can be customized by numeration. - i-Buttons are waterproof. - SALTO i-Button bracelets models are available in: red, blue, yellow, green,

    close
  • Contactless RFID key fobs

  • Contactless RFID key fobs

    - RFID technologies available: DESfire, Mifare. - 13.56MHz contactless RFID identification. - High security, by using password and encrypted Proximity fobs*. - SALTO Virtual Network (SVN) compatible. - Different memory capacities from 256bytes up to 4Kbytes*. - Reusable key fob. - Multi application with other systems using the same card through shared sectors*. - Customised fob issuing through the SALTO Authorization Media software (SAM)*. - SALTO contactless key fob models are available in: red, blue, yellow, black and green.

    close
  • Contactless RFID bracelets

  • Contactless RFID bracelets

    - RFID technologies available: Mifare. - 13.56MHz contactless RFID identification. - High security, by using encrypted Proximity watches*. - SALTO Virtual Network (SVN) compatible. - Different memory capacities from 256bytes up to 1Kbytes*. - Reusable key bracelets. - Multi-application with other systems using the same card through shared sectors*. - Customized watch issuing through the SALTO Authorization Media software (SAM)*. - SALTO contactless fob bracelet models are available in: red, blue, yellow, black, pink and green.

    close
  • XS4 GEO cylinder for swing handle

  • XS4 GEO cylinder for swing handle

    The XS4 GEO half cylinder is specially designed to fit most swing handle* server racks (DIRAK®, EMKA® and others). Ideal for use on applications where control of the operation of the rack is needed, enhancing the control and security of the access to the server racks.

    close
  • XS4 GEO Cam Lock cylinder

  • XS4 GxCL | CAM Lock cylinder front

  • XS4 GEO Cam Lock cylinder

    The XS4 GEO Cam Lock Electronic Cylinder is specially designed to fit most cabinets equipped with a cam locking mechanisms like cabinets and cupboards. The cam itself acts as a locking bolt and is directly operated when the card is presented by the user and turns the plug and the cam is rotated between 180 and 90 degrees, securing the lock. This patented and revolutionary unique design provides an extra level of protection from intrusions with a high security blocking mechanism that is exclusive to SALTO.

    close
  • XS4 GEO Electronic Padlock

  • XS4 GEO Electronic Padlock

    The XS4 GEO Electronic Padlock is a versatile locking solution that enables users to benefit from the advantages of electronic access control where previously it was only possible to use a mechanical locking solution (perimeter or fire access gates, industrial equipment yards and residential storage areas).