System Components

Wall readers

SALTO Wall readers

SALTO XS4 Wall Readers

SALTO offers a wide range of wall readers that in combination with SALTO Door Controllers enable the expansion of SALTO access control benefits to all those doors where a stand alone electronic lock cannot be fitted i.e. barriers, elevators, mechanical doors etc, or where control must be boosted by on-line real time access control.

The wall readers read encrypted data contained on the carrier and communicate it to the door controller. They also allow for updating of the carrier via SALTO Virtual Network technology making it possible to cancel lost or stolen cards remotely.

Suitable for outdoor installation, the SALTO wall reader range also includes narrow profile wall readers that can be installed in the frame of a door.

Main features and benefits:
  • ID technologies available: i-Button, DESfire, DESfire EV1, Mifare, Mifare plus, Vicinity, Inside Picopass, Legic, HID iCLASS, SKIDATA. 
  • Off-line or On-line depending on the door controller connected.
  • Virtual Network capability through SALTO Virtual Network Technology. 
  • User on card audit trailing capability for audit trailing via the SALTO Virtual Network (SVN). 
  • Contactless versions compatible with ISO 14.443A, ISO 14.443B and ISO 15.693 (Vicinity) and covering a wide range of mainstream RFID brands such as DESfire, DESfire EV1, Mifare, Mifare plus, Legic, HID iClass, Inside Picopass and SKIDATA allowing multiaplication with third party systems using one card.
  • SALTO 9000 contactless range is compatible with NFC (Near Field Communication) technology which allows NFC enabled cell phones to act as contactless data carriers to open and control SALTO access controlled doors.
  • All communications between the carrier and the electronic lock are encrypted and secured. 
  • Can be flush or surface mounted depending on the base (available separately)*.
  • Available in a narrow profile version for special doors.
  • Red and green coloured LED to indicate lock authorization.
  • Blue coloured LED to indicate carrier updating.
  • For external use and protection against vandalism it can be used with the WRMFWAV frame and flush mounting base*. Can be combined with Personal Identification Number (PIN) code pad for card authentication*.
  • Compatible with standard electrical back boxes for easy fitting*.
  • Can be used for integration with other systems through the addition of the Wall Reader Adaptor or Control Unit Adaptor.

* For Modular Wall Readers range only.

Product range


SALTO XS4 Modular wall readersXS4 i-Button modular wall reader

The i-Button SALTO Modular wall reader reads data from the carrier and then communicates it to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology.

Read more...

SALTO XS4 i-Button narrow profile wall readerXS4  i-Button wall reader for narrow profile applications

The i-Button slim wall reader for flush mounting, has been specially designed to fit doors that have a narrow profile frame and where there is insufficient space to install a standard wall reader.

Read more...

SALTO XS4 modualr wall readerXS4 i-Button modular wall reader for special wall mounting

The i-Button SALTO Modular wall reader with external case is specially designed for outdoor installation on uneven surfaces. This wall reader reads data from the carrier and then communicates it to the door controller. It also allows for updating of the carriers via SALTO Virtual Network technology.

Read more...

SALTO XS4 Modualr wall reader with keypadXS4 i-Button modular wall reader for special wall mounting with key pad

The i-Button SALTO Modular wall reader with key pad includes a PIN Key Pad specially designed for outdoor installation on uneven surfaces. The key pad provides increased security as dual identification is needed to access the door.

Read more...

SALTO XS4 contactless modular wall readerXS4 RFID modular wall reader

SALTO offers a broad range of 13,56Mhz RFID Contactless Smart Card wall readers. They read encrypted data from the carriers and then communicate it to the door controllers.

They also allow for updating of the carriers via SALTO Virtual Network technology.

Read more...

SALTO XS4 RFID narrow profile wall readerXS4 RFID wall reader for narrow profile appliations

The SALTO contcatless slim wall reader for flush mounting, has been specially designed to fit doors that have a narrow profile frame and where there is insufficient space to install a standard wall reader. The Wall reader reads data from the carrier and then communicates it to the control unit. They also allow for updating of the carriers via SALTO Virtual Network technology.

Read more...

SALTO XS4 RFID modular wall reader with key padXS4 RFID modular wall reader for special wall mounting with keypad

The Contactless SALTO Modular wall reader with key pad is a wall reader that includes a PIN Key Pad specially designed for outdoor installation on uneven surfaces. The key pad provides increased security as dual identification is needed to access the door.

Read more...

SALTO XS4 wall reader keypadXS4 WRM key pad

Compatible with SALTO modular wall readers, the WRMKP key pad allows for the additional use of a Personal Identification Number (PIN). It should be mounted on one of the SALTO WRM double mount bases.

Read more...

SALTO XS4 wall reader pedestalXS4 WRM Pedestal

Smart, innovative and designed with aesthetics in mind, the SALTO Modular Wall Reader Pedestal is a new product developed to allow for the installation of readers and controllers in places where they cannot normally be fitted, such as on door frames or walls.

Read more...

SALTO XS4 modulat wall reader antivandalic frameXS4 WRMFWAV antivandalic frame for SALTO modular wall readers

This accessory has been designed to protect the WRM wall reader from adverse and harsh environments.

Read more...

SALTO XS4 wall reader instalation basesXS4 Mounting bases for modular wall readers

SALTO offers several base options to fit modular wall readers. Depending on your needs you can choose a single or double base to fit a wall reader and a key pad. Both bases include an internal gasket to prevent water ingress and have several fixing points to allow for adjustment during installation.

Read more...